In this part, we will be adding health pickups, ammo pickups, targets the player can destroy, support for joypads, and add the ability to change weapons with the scroll wheel.
Zakładam, że skończyłeś Część 3 przed przejściem do tej części poradnika
Adding joypad input¶
In Godot, any game controller is referred to as a joypad. This includes: Console controllers, Joysticks (like for flight simulators), Wheels (like for driving simulators), VR Controllers, and more!
Firstly, we need to change a few things in our project's input map. Open up the project settings and select the
Input Map tab.
Now we need to add some joypad buttons to our various actions. Click the plus icon and select
Feel free to use whatever button layout you want. Make sure that the device selected is set to
0. In the finished project, we will be using the following:
Device 0, Button 4 (L, L1)
Device 0, Button 0 (PS Cross, XBox A, Nintendo B)
Device 0, Button 0 (PS Square, XBox X, Nintendo Y)
Device 0, Button 12 (D-Pad Up)
Device 0, Button 15 (D-Pad Right)
Device 0, Button 14 (D-Pad Left)
Device 0, Button 1 (PS Circle, XBox B, Nintendo A).
These are already set up for you if you downloaded the starter assets
Once you are happy with the input, close the project settings and save.
Now let's open up
Player.gd and add joypad input.
First, we need to define a few new class variables. Add the following class variables to
# You may need to adjust depending on the sensitivity of your joypad var JOYPAD_SENSITIVITY = 2 const JOYPAD_DEADZONE = 0.15
Sprawdźmy co dane funkcje robią:
JOYPAD_SENSITIVITY: This is how fast the joypad's joysticks will move the camera.
JOYPAD_DEADZONE: The dead zone for the joypad. You may need to adjust depending on your joypad.
Many joypads jitter around a certain point. To counter this, we ignore any movement within a radius of JOYPAD_DEADZONE. If we did not ignore said movement, the camera would jitter.
Also, we are defining
JOYPAD_SENSITIVITY as a variable instead of a constant because we'll later be changing it.
Now we are ready to start handling joypad input!
process_input, add the following code just before
input_movement_vector = input_movement_vector.normalized():
Let's go over what we're doing.
Firstly, we check to see if there is a connected joypad.
If there is a joypad connected, we then get its left stick axes for right/left and up/down. Because a wired Xbox 360 controller has different joystick axis mapping based on OS, we will use different axes based on the OS.
This tutorial assumes you are using a XBox 360 or a PlayStation wired controller. Also, I do not (currently) have access to a Mac computer, so the joystick axes may need changing. If they do, please open a GitHub issue on the Godot documentation repository! Thanks!
Next, we check to see if the joypad vector length is within the
If it is, we set
joypad_vec to an empty Vector2. If it is not, we use a scaled Radial Dead zone for precise dead zone calculation.
You can find a great article explaining all about how to handle joypad/controller dead zones here.
We're using a translated version of the scaled radial dead zone code provided in that article. The article is a great read, and I highly suggest giving it a look!
Finally, we add
Remember how we normalize
input_movement_vector? This is why! If we did not normalize
input_movement_vector, the player could
move faster if they pushed in the same direction with both the keyboard and the joypad!
Stwórz nową funkcję nazywającą się
process_view_input i dodaj do niej:
Let's go over what's happening:
Firstly, we check the mouse mode. If the mouse mode is not
MOUSE_MODE_CAPTURED, we want to return, which will skip the code below.
Next, we define a new Vector2 called
joypad_vec. This will hold the right joystick position. Based on the OS, we set its values so
it is mapped to the proper axes for the right joystick.
As stated above, I do not (currently) have access to a Mac computer, so the joystick axes may need changing. If they do, please open a GitHub issue on the Godot documentation repository! Thanks!
We then account for the joypad's dead zone, exactly like in
Then, we rotate
rotation_helper and the player's KinematicBody using
Notice how the code that handles rotating the player and
rotation_helper is exactly the same as the
_input. All we've done is change the values to use
Due to a few mouse-related bugs on Windows, we cannot put mouse rotation in
process_view as well.
Once these bugs are fixed, this will likely be updated to place the mouse rotation here in
process_view_input as well.
Finally, we clamp the camera's rotation so the player cannot look upside down.
The last thing we need to do is add
process_view_input is added to
_physics_process, you should be able to play using a joypad!
I decided not to use the joypad triggers for firing because we'd then have to do some more axis managing, and because I prefer to use a shoulder buttons to fire.
If you want to use the triggers for firing, you will need to change how firing works in
process_input. You need to get the axis values for the triggers,
and check if it's over a certain value, say
0.8 for example. If it is, you add the same code as when the
fire action was pressed.
Adding mouse scroll wheel input¶
Let's add one more input related feature before we start working on the pickups and the target. Let's add the ability to change weapons using the scroll wheel on the mouse.
Player.gd and add the following class variables:
var mouse_scroll_value = 0 const MOUSE_SENSITIVITY_SCROLL_WHEEL = 0.08
Let's go over what each of these new variables will be doing:
mouse_scroll_value: The value of the mouse scroll wheel.
MOUSE_SENSITIVITY_SCROLL_WHEEL: How much a single scroll action increases mouse_scroll_value
Now let's add the following to
if event is InputEventMouseButton and Input.get_mouse_mode() == Input.MOUSE_MODE_CAPTURED: if event.button_index == BUTTON_WHEEL_UP or event.button_index == BUTTON_WHEEL_DOWN: if event.button_index == BUTTON_WHEEL_UP: mouse_scroll_value += MOUSE_SENSITIVITY_SCROLL_WHEEL elif event.button_index == BUTTON_WHEEL_DOWN: mouse_scroll_value -= MOUSE_SENSITIVITY_SCROLL_WHEEL mouse_scroll_value = clamp(mouse_scroll_value, 0, WEAPON_NUMBER_TO_NAME.size() - 1) if changing_weapon == false: if reloading_weapon == false: var round_mouse_scroll_value = int(round(mouse_scroll_value)) if WEAPON_NUMBER_TO_NAME[round_mouse_scroll_value] != current_weapon_name: changing_weapon_name = WEAPON_NUMBER_TO_NAME[round_mouse_scroll_value] changing_weapon = true mouse_scroll_value = round_mouse_scroll_value
Let's go over what's happening here:
Firstly, we check if the event is an
InputEventMouseButton event and that the mouse mode is
Then, we check to see if the button index is either a
If the event's index is indeed a button wheel index, we then check to see if it is a
Based on whether it is up or down, we add or subtract
Next, we clamp mouse scroll value to ensure it is inside the range of selectable weapons.
We then check to see if the player is changing weapons or reloading. If the player is doing neither, we round
mouse_scroll_value and cast it to an
We are casting
mouse_scroll_value to an
int so we can use it as a key in our dictionary. If we left it as a float,
we would get an error when we tried to run the project.
Next, we check to see if the weapon name at
round_mouse_scroll_value is not equal to the current weapon name using
If the weapon is different from the player's current weapon, we assign
true so the player will change weapons in
process_changing_weapon, and set
The reason we are setting
mouse_scroll_value to the rounded scroll value is because we do not want the player to keep their
mouse scroll wheel just in between values, giving them the ability to switch almost extremely fast. By assigning
round_mouse_scroll_value, we ensure that each weapon takes exactly the same amount of scrolling to change.
One more thing we need to change is in
process_input. In the code for changing weapons, add the following right after the line
changing_weapon = true:
mouse_scroll_value = weapon_change_number
Now the scroll value will be changed with the keyboard input. If we did not change this, the scroll value would be out of sync. If the scroll wheel were out of sync, scrolling forwards or backwards would not transition to the next/last weapon, but rather the next/last weapon the scroll wheel changed to.
Now you can change weapons using the scroll wheel! Go give it a whirl!
Adding the health pickups¶
Teraz, gdy gracz ma zdrowie i amunicję, idealnie byłoby, gdybyśmy znaleźli sposób na uzupełnienie tych zasobów.
Holder if it's not already expanded. Notice how we have two Spatial nodes, one called
Health_Kit and another called
This is because we're actually going to be making two sizes of health pickups, one small and one large/normal.
have a single MeshInstance as their children.
Health_Pickup_Trigger. This is an Area node we're going to use to check if the player has walked close enough to pick up
the health kit. If you expand it, you'll find two collision shapes, one for each size. We will be using a different collision shape size based on the size of the
health pickup, so the smaller health pickup has a trigger collision shape closer to its size.
Po pierwsze, dodaj do sceny węzeł AnimationPlayer do sceny jako dziecko "background" (tło - węzeł główny).
Health_Pickup i stwórz skrypt o nazwie Health_Pickup.gd`. Dodać do niego:
extends Spatial export (int, "full size", "small") var kit_size = 0 setget kit_size_change # 0 = full size pickup, 1 = small pickup const HEALTH_AMOUNTS = [70, 30] const RESPAWN_TIME = 20 var respawn_timer = 0 var is_ready = false func _ready(): $Holder/Health_Pickup_Trigger.connect("body_entered", self, "trigger_body_entered") is_ready = true kit_size_change_values(0, false) kit_size_change_values(1, false) kit_size_change_values(kit_size, true) func _physics_process(delta): if respawn_timer > 0: respawn_timer -= delta if respawn_timer <= 0: kit_size_change_values(kit_size, true) func kit_size_change(value): if is_ready: kit_size_change_values(kit_size, false) kit_size = value kit_size_change_values(kit_size, true) else: kit_size = value func kit_size_change_values(size, enable): if size == 0: $Holder/Health_Pickup_Trigger/Shape_Kit.disabled = !enable $Holder/Health_Kit.visible = enable elif size == 1: $Holder/Health_Pickup_Trigger/Shape_Kit_Small.disabled = !enable $Holder/Health_Kit_Small.visible = enable func trigger_body_entered(body): if body.has_method("add_health"): body.add_health(HEALTH_AMOUNTS[kit_size]) respawn_timer = RESPAWN_TIME kit_size_change_values(kit_size, false)
Przejdźmy do tego, co robi ten skrypt, zaczynając od jego zmiennych klasowych:
kit_size: The size of the health pickup. Notice how we're using a
setgetfunction to tell if it's changed.
HEALTH_AMMOUNTS: The amount of health each pickup in each size contains.
RESPAWN_TIME: The amount of time, in seconds, it takes for the health pickup to respawn
respawn_timer: A variable used to track how long the health pickup has been waiting to respawn.
is_ready: Zmienna umożliwiająca śledzenie, czy funkcja
readyzostała wywołana, czy nie.
setget functions are called before
_ready; we need to ignore the
first kit_size_change call, because we cannot access child nodes until
_ready is called. If we did not ignore the
setget call, we would get several errors in the debugger.
Also, notice how we are using an exported variable. This is so we can change the size of the health pickups in the editor. This makes it so we do not have to make two scenes for the two sizes, since we can easily change sizes in the editor using the exported variable.
See Podstawy GDScript and scroll down to the Exports section for a list of export hints you can use.
Firstly, we connect the
body_entered signal from the
Health_Pickup_Trigger to the
trigger_body_entered function. This makes it so any
body that enters the Area triggers the
Next, we set
true so we can use the
Then we hide all the possible kits and their collision shapes using
kit_size_change_values. The first argument is the size of the kit, while the second argument
is whether to enable or disable the collision shape and mesh at that size.
Then we make only the kit size we selected visible, calling
kit_size_change_values and passing in
true, so the size at
kit_size is enabled.
Next let's look at
The first thing we do is check to see if
true, we then make whatever kit already assigned to
kit_size disabled using
kit_size_change_values, passing in
Then we assign
kit_size to the new value passed in,
value. Then we call
kit_size_change_values passing in
kit_size again, but this time
with the second argument as
true so we enable it. Because we changed
kit_size to the passed in value, this will make whatever kit size was passed in visible.
is_ready is not
true, we simply assign
kit_size to the passed in
Now let's look at
The first thing we do is check to see which size was passed in. Based on which size we want to enable/disable, we want to get different nodes.
We get the collision shape for the node corresponding to
size and disable it based on the
enabled passed in argument/variable.
Why are we using
!enable instead of
enable? This is so when we say we want to enable the node, we can pass in
true, but since
CollisionShape uses disabled instead of enabled, we need to flip it. By flipping it, we can enable the collision shape
and make the mesh visible when
true is passed in.
We then get the correct Spatial node holding the mesh and set its visibility to
This function may be a little confusing; try to think of it like this: We're enabling/disabling the proper nodes for
enabled. This is so we cannot pick up
health for a size that is not visible, and so only the mesh for the proper size will be visible.
Finally, let's look at
The first thing we do is check whether or not the body that has just entered has a method/function called
add_health. If it does, we then
add_health and pass in the health provided by the current kit size.
Then we set
RESPAWN_TIME so the player has to wait before the player can get health again. Finally, call
false so the kit at
kit_size is invisible until it has waited long enough to respawn.
The last thing we need to do before the player can use this health pickup is add a few things to
Player.gd and add the following class variable:
const MAX_HEALTH = 150
MAX_HEALTH: The maximum amount of health a player can have.
Now we need to add the
add_health function to the player. Add the following to
func add_health(additional_health): health += additional_health health = clamp(health, 0, MAX_HEALTH)
Let's quickly go over what this does.
We first add
additional_health to the player's current health. We then clamp the health so that it cannot take on a value higher than
MAX_HEALTH, nor a value lower
With that done, the player can now collect health! Go place a few
Health_Pickup scenes around and give it a try. You can change the size of the health pickup in the editor
Health_Pickup instanced scene is selected, from a convenient drop down.
Adding the ammo pickups¶
While adding health is good and all, we can't reap the rewards from adding it since nothing can (currently) damage us. Let's add some ammo pickups next!
Ammo_Pickup.tscn. Notice how it's structured exactly the same as
Health_Pickup.tscn, but with the meshes and trigger collision shapes changed slightly to account
for the difference in mesh sizes.
Ammo_Pickup and add a new script called
Ammo_Pickup.gd. Add the following:
extends Spatial export (int, "full size", "small") var kit_size = 0 setget kit_size_change # 0 = full size pickup, 1 = small pickup const AMMO_AMOUNTS = [4, 1] const RESPAWN_TIME = 20 var respawn_timer = 0 var is_ready = false func _ready(): $Holder/Ammo_Pickup_Trigger.connect("body_entered", self, "trigger_body_entered") is_ready = true kit_size_change_values(0, false) kit_size_change_values(1, false) kit_size_change_values(kit_size, true) func _physics_process(delta): if respawn_timer > 0: respawn_timer -= delta if respawn_timer <= 0: kit_size_change_values(kit_size, true) func kit_size_change(value): if is_ready: kit_size_change_values(kit_size, false) kit_size = value kit_size_change_values(kit_size, true) else: kit_size = value func kit_size_change_values(size, enable): if size == 0: $Holder/Ammo_Pickup_Trigger/Shape_Kit.disabled = !enable $Holder/Ammo_Kit.visible = enable elif size == 1: $Holder/Ammo_Pickup_Trigger/Shape_Kit_Small.disabled = !enable $Holder/Ammo_Kit_Small.visible = enable func trigger_body_entered(body): if body.has_method("add_ammo"): body.add_ammo(AMMO_AMOUNTS[kit_size]) respawn_timer = RESPAWN_TIME kit_size_change_values(kit_size, false)
You may have noticed this code looks almost exactly the same as the health pickup. That's because it largely is the same! Only a few things have been changed, and that's what we're going to go over.
Firstly, notice the change to
AMMO_AMOUNTS will be how many ammo clips/magazines the pickup adds to the current weapon.
(Unlike in the case of
HEALTH_AMMOUNTS, which has stood for how many health points would be awarded, we add an entire clip to the current weapon instead of the raw ammo amount)
The only other thing to notice is in
trigger_body_entered. We're checking for the existence of and calling a function called
add_ammo instead of
Other than those two small changes, everything else is the same as the health pickup!
All we need to do to make the ammo pickups work is add a new function to the player. Open
Player.gd and add the following function:
func add_ammo(additional_ammo): if (current_weapon_name != "UNARMED"): if (weapons[current_weapon_name].CAN_REFILL == true): weapons[current_weapon_name].spare_ammo += weapons[current_weapon_name].AMMO_IN_MAG * additional_ammo
Sprawdźmy co dane funkcje robią.
The first thing we check is whether the player is
UNARMED does not have a node/script, we want to make sure the player is not
UNARMED before trying to get the node/script attached to
Next, we check to see if the current weapon can be refilled. If the current weapon can, we add a full clip/magazine worth of ammo to the weapon by
multiplying the current weapon's
AMMO_IN_MAG value by however many ammo clips we're adding (
With that done, you should now be able to get additional ammo! Go place some ammo pickups in one/both/all of the scenes and give it a try!
Notice how we're not limiting the amount of ammo you can carry. To limit the amount of ammo each weapon can carry, you need to add an additional variable to
each weapon's script, and then clamp the weapon's
spare_ammo variable after adding ammo in
Dodawanie niszczących się celów¶
Before we end this part, let's add some targets.
Target.tscn and take a look at the scenes in the scene tree.
Firstly, notice how we're not using a RigidBody node, but a StaticBody one. The reason behind this is our non-broken targets will not be moving anywhere; using a RigidBody would be more hassle than it's worth since all it has to do is stay still.
The other thing to note is we have a node called
Broken_Target_Holder. This node is going to hold a spawned/instanced scene called
Broken_Target.tscn. Open up
Notice how the target is broken up into five pieces, each a RigidBody node. We're going to spawn/instance this scene when the target takes too much damage and needs to be destroyed. Then, we're going to hide the non-broken target, so it looks like the target shattered rather than a shattered target was spawned/instanced.
While you still have
Broken_Target.tscn open, attach
RigidBody_hit_test.gd to all of the RigidBody nodes. This will make
it so the player can shoot at the broken pieces and they will react to the bullets.
Alright, now switch back to
Target.tscn, select the
Target StaticBody node and create a new script called
Add the following code to
extends StaticBody const TARGET_HEALTH = 40 var current_health = 40 var broken_target_holder # The collision shape for the target. # NOTE: this is for the whole target, not the pieces of the target. var target_collision_shape const TARGET_RESPAWN_TIME = 14 var target_respawn_timer = 0 export (PackedScene) var destroyed_target func _ready(): broken_target_holder = get_parent().get_node("Broken_Target_Holder") target_collision_shape = $Collision_Shape func _physics_process(delta): if target_respawn_timer > 0: target_respawn_timer -= delta if target_respawn_timer <= 0: for child in broken_target_holder.get_children(): child.queue_free() target_collision_shape.disabled = false visible = true current_health = TARGET_HEALTH func bullet_hit(damage, bullet_transform): current_health -= damage if current_health <= 0: var clone = destroyed_target.instance() broken_target_holder.add_child(clone) for rigid in clone.get_children(): if rigid is RigidBody: var center_in_rigid_space = broken_target_holder.global_transform.origin - rigid.global_transform.origin var direction = (rigid.transform.origin - center_in_rigid_space).normalized() # Apply the impulse with some additional force (I find 12 works nicely). rigid.apply_impulse(center_in_rigid_space, direction * 12 * damage) target_respawn_timer = TARGET_RESPAWN_TIME target_collision_shape.disabled = true visible = false
Let's go over what this script does, starting with the class variables:
TARGET_HEALTH: The amount of damage needed to break a fully healed target.
current_health: The amount of health this target currently has.
broken_target_holder: A variable to hold the
Broken_Target_Holdernode so we can use it easily.
target_collision_shape: A variable to hold the CollisionShape for the non-broken target.
TARGET_RESPAWN_TIME: The length of time, in seconds, it takes for a target to respawn.
target_respawn_timer: A variable to track how long a target has been broken.
destroyed_target: A PackedScene to hold the broken target scene.
Notice how we're using an exported variable (a PackedScene) to get the broken target scene instead of
preload. By using an exported variable, we can choose the scene from the editor, and if we need to use a different scene,
it's as easy as selecting a different scene in the editor; we don't need to go to the code to change the scene we're using.
Let's look at
The first thing we do is get the broken target holder and assign it to
broken_target_holder. Notice how we're using
get_parent().get_node() here, instead
$. If you wanted to use
$, then you'd need to change
At the time of when this was written, I did not realize you can use
$"../NodeName" to get the parent nodes using
$, which is why
is used instead.
Next, we get the collision shape and assign it to
target_collision_shape. The reason we need the collision shape is because even when the mesh is invisible, the
collision shape will still exist in the physics world. This makes it so the player could interact with a non-broken target even though it's invisible, which is
not what we want. To get around this, we will disable/enable the collision shape as we make the mesh visible/invisible.
Next let's look at
We're only going to be using
_physics_process for respawning, and so the first thing we do is check to see if
target_respawn_timer is greater than
If it is, we then subtract
delta from it.
Then we check to see if
0 or less. The reason behind this is since we just removed
target_respawn_timer, if it's
0 or less, then the target just got here, effectively allowing us to do whatever we need to do when the timer is finished.
In this case, we want to respawn the target.
The first thing we do is remove all children in the broken target holder. We do this by iterating over all of the children in
broken_target_holder and free them using
Next, we enable the collision shape by setting its
disabled boolean to
Then we make the target, and all of its children nodes, visible again.
Finally, we reset the target's health (
Finally, let's look at
The first thing we do is subtract however much damage the bullet does from the target's health.
Next we check to see if the target is at
0 health or lower. If it is, the target has just died and we need to spawn a broken target.
We first instance a new destroyed target scene, and assign it to a new variable, a
Next we add the
clone as a child of the broken target holder.
For bonus effect, we want to make all the target pieces explode outwards. To do this, we iterate over all the children in
For each child, we first check to see if it's a RigidBody node. If it is, we then calculate the center position of the target relative to the child node. Then we figure out which direction the child node is relative to the center. Using those calculated variables, we push the child from the calculated center, in the direction away from the center, using the damage of the bullet as the force.
We multiply the damage by
12 so it has a more dramatic effect. You can change this to a higher or lower value depending on how explosively you want
your targets to shatter.
Next, we set the target's respawn timer. We set the timer to
TARGET_RESPAWN_TIME, so it takes
TARGET_RESPAWN_TIME in seconds until it is respawned.
Then we disable the non-broken target's collision shape, and set the target's visibility to
Make sure to set the exported
destroyed_target value for
Target.tscn in the editor! Otherwise the targets will not be destroyed
and you will get an error!
With that done, go place some
Target.tscn instances around in one/both/all of the levels. You should find they explode into five pieces after they've taken enough
damage. After a little while, they'll respawn into a whole target again.
Now you can use a joypad, change weapons with the mouse's scroll wheel, replenish your health and ammo, and break targets with your weapons.
In the next part, Część 5, we're going to add grenades to our player, give our player the ability to grab and throw objects, and add turrets!
Jeśli kiedykolwiek się zagubisz, przeczytaj kod ponownie!
You can download the finished project for this part here: