Physics2DServer¶

Inherits: Object

Server interface for low-level 2D physics access.

Description¶

Physics2DServer is the server responsible for all 2D physics. It can create many kinds of physics objects, but does not insert them on the node tree.

Methods¶

void

area_add_shape ( RID area, RID shape, Transform2D transform=Transform2D( 1, 0, 0, 1, 0, 0 ), bool disabled=false )

void

area_attach_canvas_instance_id ( RID area, int id )

void

area_attach_object_instance_id ( RID area, int id )

void

area_clear_shapes ( RID area )

RID

area_create ( )

int

area_get_canvas_instance_id ( RID area ) const

int

area_get_object_instance_id ( RID area ) const

Variant

area_get_param ( RID area, AreaParameter param ) const

RID

area_get_shape ( RID area, int shape_idx ) const

int

area_get_shape_count ( RID area ) const

Transform2D

area_get_shape_transform ( RID area, int shape_idx ) const

RID

area_get_space ( RID area ) const

AreaSpaceOverrideMode

area_get_space_override_mode ( RID area ) const

Transform2D

area_get_transform ( RID area ) const

void

area_remove_shape ( RID area, int shape_idx )

void

area_set_area_monitor_callback ( RID area, Object receiver, String method )

void

area_set_collision_layer ( RID area, int layer )

void

area_set_collision_mask ( RID area, int mask )

void

area_set_monitor_callback ( RID area, Object receiver, String method )

void

area_set_monitorable ( RID area, bool monitorable )

void

area_set_param ( RID area, AreaParameter param, Variant value )

void

area_set_shape ( RID area, int shape_idx, RID shape )

void

area_set_shape_disabled ( RID area, int shape_idx, bool disabled )

void

area_set_shape_transform ( RID area, int shape_idx, Transform2D transform )

void

area_set_space ( RID area, RID space )

void

area_set_space_override_mode ( RID area, AreaSpaceOverrideMode mode )

void

area_set_transform ( RID area, Transform2D transform )

void

body_add_central_force ( RID body, Vector2 force )

void

body_add_collision_exception ( RID body, RID excepted_body )

void

body_add_force ( RID body, Vector2 offset, Vector2 force )

void

body_add_shape ( RID body, RID shape, Transform2D transform=Transform2D( 1, 0, 0, 1, 0, 0 ), bool disabled=false )

void

body_add_torque ( RID body, float torque )

void

body_apply_central_impulse ( RID body, Vector2 impulse )

void

body_apply_impulse ( RID body, Vector2 position, Vector2 impulse )

void

body_apply_torque_impulse ( RID body, float impulse )

void

body_attach_canvas_instance_id ( RID body, int id )

void

body_attach_object_instance_id ( RID body, int id )

void

body_clear_shapes ( RID body )

RID

body_create ( )

int

body_get_canvas_instance_id ( RID body ) const

int

body_get_collision_layer ( RID body ) const

int

body_get_collision_mask ( RID body ) const

CCDMode

body_get_continuous_collision_detection_mode ( RID body ) const

Physics2DDirectBodyState

body_get_direct_state ( RID body )

int

body_get_max_contacts_reported ( RID body ) const

BodyMode

body_get_mode ( RID body ) const

int

body_get_object_instance_id ( RID body ) const

float

body_get_param ( RID body, BodyParameter param ) const

RID

body_get_shape ( RID body, int shape_idx ) const

int

body_get_shape_count ( RID body ) const

Variant

body_get_shape_metadata ( RID body, int shape_idx ) const

Transform2D

body_get_shape_transform ( RID body, int shape_idx ) const

RID

body_get_space ( RID body ) const

Variant

body_get_state ( RID body, BodyState state ) const

bool

body_is_omitting_force_integration ( RID body ) const

void

body_remove_collision_exception ( RID body, RID excepted_body )

void

body_remove_shape ( RID body, int shape_idx )

void

body_set_axis_velocity ( RID body, Vector2 axis_velocity )

void

body_set_collision_layer ( RID body, int layer )

void

body_set_collision_mask ( RID body, int mask )

void

body_set_continuous_collision_detection_mode ( RID body, CCDMode mode )

void

body_set_force_integration_callback ( RID body, Object receiver, String method, Variant userdata=null )

void

body_set_max_contacts_reported ( RID body, int amount )

void

body_set_mode ( RID body, BodyMode mode )

void

body_set_omit_force_integration ( RID body, bool enable )

void

body_set_param ( RID body, BodyParameter param, float value )

void

body_set_shape ( RID body, int shape_idx, RID shape )

void

body_set_shape_as_one_way_collision ( RID body, int shape_idx, bool enable, float margin )

void

body_set_shape_disabled ( RID body, int shape_idx, bool disabled )

void

body_set_shape_metadata ( RID body, int shape_idx, Variant metadata )

void

body_set_shape_transform ( RID body, int shape_idx, Transform2D transform )

void

body_set_space ( RID body, RID space )

void

body_set_state ( RID body, BodyState state, Variant value )

bool

body_test_motion ( RID body, Transform2D from, Vector2 motion, bool infinite_inertia, float margin=0.08, Physics2DTestMotionResult result=null )

RID

capsule_shape_create ( )

RID

circle_shape_create ( )

RID

concave_polygon_shape_create ( )

RID

convex_polygon_shape_create ( )

RID

damped_spring_joint_create ( Vector2 anchor_a, Vector2 anchor_b, RID body_a, RID body_b )

float

damped_string_joint_get_param ( RID joint, DampedStringParam param ) const

void

damped_string_joint_set_param ( RID joint, DampedStringParam param, float value )

void

free_rid ( RID rid )

int

get_process_info ( ProcessInfo process_info )

RID

groove_joint_create ( Vector2 groove1_a, Vector2 groove2_a, Vector2 anchor_b, RID body_a, RID body_b )

float

joint_get_param ( RID joint, JointParam param ) const

JointType

joint_get_type ( RID joint ) const

void

joint_set_param ( RID joint, JointParam param, float value )

RID

line_shape_create ( )

RID

pin_joint_create ( Vector2 anchor, RID body_a, RID body_b )

RID

ray_shape_create ( )

RID

rectangle_shape_create ( )

RID

segment_shape_create ( )

void

set_active ( bool active )

Variant

shape_get_data ( RID shape ) const

ShapeType

shape_get_type ( RID shape ) const

void

shape_set_data ( RID shape, Variant data )

RID

space_create ( )

Physics2DDirectSpaceState

space_get_direct_state ( RID space )

float

space_get_param ( RID space, SpaceParameter param ) const

bool

space_is_active ( RID space ) const

void

space_set_active ( RID space, bool active )

void

space_set_param ( RID space, SpaceParameter param, float value )

Enumerations¶

enum SpaceParameter:

  • SPACE_PARAM_CONTACT_RECYCLE_RADIUS = 0 --- Constant to set/get the maximum distance a pair of bodies has to move before their collision status has to be recalculated.

  • SPACE_PARAM_CONTACT_MAX_SEPARATION = 1 --- Constant to set/get the maximum distance a shape can be from another before they are considered separated.

  • SPACE_PARAM_BODY_MAX_ALLOWED_PENETRATION = 2 --- Constant to set/get the maximum distance a shape can penetrate another shape before it is considered a collision.

  • SPACE_PARAM_BODY_LINEAR_VELOCITY_SLEEP_THRESHOLD = 3 --- Constant to set/get the threshold linear velocity of activity. A body marked as potentially inactive for both linear and angular velocity will be put to sleep after the time given.

  • SPACE_PARAM_BODY_ANGULAR_VELOCITY_SLEEP_THRESHOLD = 4 --- Constant to set/get the threshold angular velocity of activity. A body marked as potentially inactive for both linear and angular velocity will be put to sleep after the time given.

  • SPACE_PARAM_BODY_TIME_TO_SLEEP = 5 --- Constant to set/get the maximum time of activity. A body marked as potentially inactive for both linear and angular velocity will be put to sleep after this time.

  • SPACE_PARAM_CONSTRAINT_DEFAULT_BIAS = 6 --- Constant to set/get the default solver bias for all physics constraints. A solver bias is a factor controlling how much two objects "rebound", after violating a constraint, to avoid leaving them in that state because of numerical imprecision.

  • SPACE_PARAM_TEST_MOTION_MIN_CONTACT_DEPTH = 7


enum ShapeType:

  • SHAPE_LINE = 0 --- This is the constant for creating line shapes. A line shape is an infinite line with an origin point, and a normal. Thus, it can be used for front/behind checks.

  • SHAPE_RAY = 1

  • SHAPE_SEGMENT = 2 --- This is the constant for creating segment shapes. A segment shape is a line from a point A to a point B. It can be checked for intersections.

  • SHAPE_CIRCLE = 3 --- This is the constant for creating circle shapes. A circle shape only has a radius. It can be used for intersections and inside/outside checks.

  • SHAPE_RECTANGLE = 4 --- This is the constant for creating rectangle shapes. A rectangle shape is defined by a width and a height. It can be used for intersections and inside/outside checks.

  • SHAPE_CAPSULE = 5 --- This is the constant for creating capsule shapes. A capsule shape is defined by a radius and a length. It can be used for intersections and inside/outside checks.

  • SHAPE_CONVEX_POLYGON = 6 --- This is the constant for creating convex polygon shapes. A polygon is defined by a list of points. It can be used for intersections and inside/outside checks. Unlike the CollisionPolygon2D.polygon property, polygons modified with shape_set_data do not verify that the points supplied form is a convex polygon.

  • SHAPE_CONCAVE_POLYGON = 7 --- This is the constant for creating concave polygon shapes. A polygon is defined by a list of points. It can be used for intersections checks, but not for inside/outside checks.

  • SHAPE_CUSTOM = 8 --- This constant is used internally by the engine. Any attempt to create this kind of shape results in an error.


enum AreaParameter:

  • AREA_PARAM_GRAVITY = 0 --- Constant to set/get gravity strength in an area.

  • AREA_PARAM_GRAVITY_VECTOR = 1 --- Constant to set/get gravity vector/center in an area.

  • AREA_PARAM_GRAVITY_IS_POINT = 2 --- Constant to set/get whether the gravity vector of an area is a direction, or a center point.

  • AREA_PARAM_GRAVITY_DISTANCE_SCALE = 3 --- Constant to set/get the falloff factor for point gravity of an area. The greater this value is, the faster the strength of gravity decreases with the square of distance.

  • AREA_PARAM_GRAVITY_POINT_ATTENUATION = 4 --- This constant was used to set/get the falloff factor for point gravity. It has been superseded by AREA_PARAM_GRAVITY_DISTANCE_SCALE.

  • AREA_PARAM_LINEAR_DAMP = 5 --- Constant to set/get the linear dampening factor of an area.

  • AREA_PARAM_ANGULAR_DAMP = 6 --- Constant to set/get the angular dampening factor of an area.

  • AREA_PARAM_PRIORITY = 7 --- Constant to set/get the priority (order of processing) of an area.


enum AreaSpaceOverrideMode:

  • AREA_SPACE_OVERRIDE_DISABLED = 0 --- This area does not affect gravity/damp. These are generally areas that exist only to detect collisions, and objects entering or exiting them.

  • AREA_SPACE_OVERRIDE_COMBINE = 1 --- This area adds its gravity/damp values to whatever has been calculated so far. This way, many overlapping areas can combine their physics to make interesting effects.

  • AREA_SPACE_OVERRIDE_COMBINE_REPLACE = 2 --- This area adds its gravity/damp values to whatever has been calculated so far. Then stops taking into account the rest of the areas, even the default one.

  • AREA_SPACE_OVERRIDE_REPLACE = 3 --- This area replaces any gravity/damp, even the default one, and stops taking into account the rest of the areas.

  • AREA_SPACE_OVERRIDE_REPLACE_COMBINE = 4 --- This area replaces any gravity/damp calculated so far, but keeps calculating the rest of the areas, down to the default one.


enum BodyMode:

  • BODY_MODE_STATIC = 0 --- Constant for static bodies.

  • BODY_MODE_KINEMATIC = 1 --- Constant for kinematic bodies.

  • BODY_MODE_RIGID = 2 --- Constant for rigid bodies.

  • BODY_MODE_CHARACTER = 3 --- Constant for rigid bodies in character mode. In this mode, a body can not rotate, and only its linear velocity is affected by physics.


enum BodyParameter:

  • BODY_PARAM_BOUNCE = 0 --- Constant to set/get a body's bounce factor.

  • BODY_PARAM_FRICTION = 1 --- Constant to set/get a body's friction.

  • BODY_PARAM_MASS = 2 --- Constant to set/get a body's mass.

  • BODY_PARAM_INERTIA = 3 --- Constant to set/get a body's inertia.

  • BODY_PARAM_GRAVITY_SCALE = 4 --- Constant to set/get a body's gravity multiplier.

  • BODY_PARAM_LINEAR_DAMP = 5 --- Constant to set/get a body's linear dampening factor.

  • BODY_PARAM_ANGULAR_DAMP = 6 --- Constant to set/get a body's angular dampening factor.

  • BODY_PARAM_MAX = 7 --- Represents the size of the BodyParameter enum.


enum BodyState:

  • BODY_STATE_TRANSFORM = 0 --- Constant to set/get the current transform matrix of the body.

  • BODY_STATE_LINEAR_VELOCITY = 1 --- Constant to set/get the current linear velocity of the body.

  • BODY_STATE_ANGULAR_VELOCITY = 2 --- Constant to set/get the current angular velocity of the body.

  • BODY_STATE_SLEEPING = 3 --- Constant to sleep/wake up a body, or to get whether it is sleeping.

  • BODY_STATE_CAN_SLEEP = 4 --- Constant to set/get whether the body can sleep.


enum JointType:

  • JOINT_PIN = 0 --- Constant to create pin joints.

  • JOINT_GROOVE = 1 --- Constant to create groove joints.

  • JOINT_DAMPED_SPRING = 2 --- Constant to create damped spring joints.


enum JointParam:

  • JOINT_PARAM_BIAS = 0

  • JOINT_PARAM_MAX_BIAS = 1

  • JOINT_PARAM_MAX_FORCE = 2


enum DampedStringParam:

  • DAMPED_STRING_REST_LENGTH = 0 --- Sets the resting length of the spring joint. The joint will always try to go to back this length when pulled apart.

  • DAMPED_STRING_STIFFNESS = 1 --- Sets the stiffness of the spring joint. The joint applies a force equal to the stiffness times the distance from its resting length.

  • DAMPED_STRING_DAMPING = 2 --- Sets the damping ratio of the spring joint. A value of 0 indicates an undamped spring, while 1 causes the system to reach equilibrium as fast as possible (critical damping).


enum CCDMode:

  • CCD_MODE_DISABLED = 0 --- Disables continuous collision detection. This is the fastest way to detect body collisions, but can miss small, fast-moving objects.

  • CCD_MODE_CAST_RAY = 1 --- Enables continuous collision detection by raycasting. It is faster than shapecasting, but less precise.

  • CCD_MODE_CAST_SHAPE = 2 --- Enables continuous collision detection by shapecasting. It is the slowest CCD method, and the most precise.


enum AreaBodyStatus:

  • AREA_BODY_ADDED = 0 --- The value of the first parameter and area callback function receives, when an object enters one of its shapes.

  • AREA_BODY_REMOVED = 1 --- The value of the first parameter and area callback function receives, when an object exits one of its shapes.


enum ProcessInfo:

  • INFO_ACTIVE_OBJECTS = 0 --- Constant to get the number of objects that are not sleeping.

  • INFO_COLLISION_PAIRS = 1 --- Constant to get the number of possible collisions.

  • INFO_ISLAND_COUNT = 2 --- Constant to get the number of space regions where a collision could occur.

Method Descriptions¶

  • void area_add_shape ( RID area, RID shape, Transform2D transform=Transform2D( 1, 0, 0, 1, 0, 0 ), bool disabled=false )

Adds a shape to the area, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index.


  • void area_attach_canvas_instance_id ( RID area, int id )


  • void area_attach_object_instance_id ( RID area, int id )

Assigns the area to a descendant of Object, so it can exist in the node tree.


  • void area_clear_shapes ( RID area )

Removes all shapes from an area. It does not delete the shapes, so they can be reassigned later.


  • RID area_create ( )

Creates an Area2D.


  • int area_get_canvas_instance_id ( RID area ) const


  • int area_get_object_instance_id ( RID area ) const

Gets the instance ID of the object the area is assigned to.


Returns an area parameter value. See AreaParameter for a list of available parameters.


  • RID area_get_shape ( RID area, int shape_idx ) const

Returns the RID of the nth shape of an area.


  • int area_get_shape_count ( RID area ) const

Returns the number of shapes assigned to an area.


Returns the transform matrix of a shape within an area.


  • RID area_get_space ( RID area ) const

Returns the space assigned to the area.


Returns the space override mode for the area.


Returns the transform matrix for an area.


  • void area_remove_shape ( RID area, int shape_idx )

Removes a shape from an area. It does not delete the shape, so it can be reassigned later.


  • void area_set_area_monitor_callback ( RID area, Object receiver, String method )


  • void area_set_collision_layer ( RID area, int layer )

Assigns the area to one or many physics layers.


  • void area_set_collision_mask ( RID area, int mask )

Sets which physics layers the area will monitor.


  • void area_set_monitor_callback ( RID area, Object receiver, String method )

Sets the function to call when any body/area enters or exits the area. This callback will be called for any object interacting with the area, and takes five parameters:

1: AREA_BODY_ADDED or AREA_BODY_REMOVED, depending on whether the object entered or exited the area.

2: RID of the object that entered/exited the area.

3: Instance ID of the object that entered/exited the area.

4: The shape index of the object that entered/exited the area.

5: The shape index of the area where the object entered/exited.


  • void area_set_monitorable ( RID area, bool monitorable )


Sets the value for an area parameter. See AreaParameter for a list of available parameters.


  • void area_set_shape ( RID area, int shape_idx, RID shape )

Substitutes a given area shape by another. The old shape is selected by its index, the new one by its RID.


  • void area_set_shape_disabled ( RID area, int shape_idx, bool disabled )

Disables a given shape in an area.


Sets the transform matrix for an area shape.


  • void area_set_space ( RID area, RID space )

Assigns a space to the area.


Sets the space override mode for the area. See AreaSpaceOverrideMode for a list of available modes.


Sets the transform matrix for an area.


  • void body_add_central_force ( RID body, Vector2 force )


  • void body_add_collision_exception ( RID body, RID excepted_body )

Adds a body to the list of bodies exempt from collisions.


Adds a positioned force to the applied force and torque. As with body_apply_impulse, both the force and the offset from the body origin are in global coordinates. A force differs from an impulse in that, while the two are forces, the impulse clears itself after being applied.


  • void body_add_shape ( RID body, RID shape, Transform2D transform=Transform2D( 1, 0, 0, 1, 0, 0 ), bool disabled=false )

Adds a shape to the body, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index.


  • void body_add_torque ( RID body, float torque )


  • void body_apply_central_impulse ( RID body, Vector2 impulse )


Adds a positioned impulse to the applied force and torque. Both the force and the offset from the body origin are in global coordinates.


  • void body_apply_torque_impulse ( RID body, float impulse )


  • void body_attach_canvas_instance_id ( RID body, int id )


  • void body_attach_object_instance_id ( RID body, int id )

Assigns the area to a descendant of Object, so it can exist in the node tree.


  • void body_clear_shapes ( RID body )

Removes all shapes from a body.


  • RID body_create ( )

Creates a physics body.


  • int body_get_canvas_instance_id ( RID body ) const


  • int body_get_collision_layer ( RID body ) const

Returns the physics layer or layers a body belongs to.


  • int body_get_collision_mask ( RID body ) const

Returns the physics layer or layers a body can collide with.


  • CCDMode body_get_continuous_collision_detection_mode ( RID body ) const

Returns the continuous collision detection mode.


Returns the Physics2DDirectBodyState of the body.


  • int body_get_max_contacts_reported ( RID body ) const

Returns the maximum contacts that can be reported. See body_set_max_contacts_reported.


Returns the body mode.


  • int body_get_object_instance_id ( RID body ) const

Gets the instance ID of the object the area is assigned to.


Returns the value of a body parameter. See BodyParameter for a list of available parameters.


  • RID body_get_shape ( RID body, int shape_idx ) const

Returns the RID of the nth shape of a body.


  • int body_get_shape_count ( RID body ) const

Returns the number of shapes assigned to a body.


  • Variant body_get_shape_metadata ( RID body, int shape_idx ) const

Returns the metadata of a shape of a body.


Returns the transform matrix of a body shape.


  • RID body_get_space ( RID body ) const

Returns the RID of the space assigned to a body.


Returns a body state.


  • bool body_is_omitting_force_integration ( RID body ) const

Returns whether a body uses a callback function to calculate its own physics (see body_set_force_integration_callback).


  • void body_remove_collision_exception ( RID body, RID excepted_body )

Removes a body from the list of bodies exempt from collisions.


  • void body_remove_shape ( RID body, int shape_idx )

Removes a shape from a body. The shape is not deleted, so it can be reused afterwards.


  • void body_set_axis_velocity ( RID body, Vector2 axis_velocity )

Sets an axis velocity. The velocity in the given vector axis will be set as the given vector length. This is useful for jumping behavior.


  • void body_set_collision_layer ( RID body, int layer )

Sets the physics layer or layers a body belongs to.


  • void body_set_collision_mask ( RID body, int mask )

Sets the physics layer or layers a body can collide with.


  • void body_set_continuous_collision_detection_mode ( RID body, CCDMode mode )

Sets the continuous collision detection mode using one of the CCDMode constants.

Continuous collision detection tries to predict where a moving body will collide, instead of moving it and correcting its movement if it collided.


  • void body_set_force_integration_callback ( RID body, Object receiver, String method, Variant userdata=null )

Sets the function used to calculate physics for an object, if that object allows it (see body_set_omit_force_integration).


  • void body_set_max_contacts_reported ( RID body, int amount )

Sets the maximum contacts to report. Bodies can keep a log of the contacts with other bodies, this is enabled by setting the maximum amount of contacts reported to a number greater than 0.


Sets the body mode using one of the BodyMode constants.


  • void body_set_omit_force_integration ( RID body, bool enable )

Sets whether a body uses a callback function to calculate its own physics (see body_set_force_integration_callback).


Sets a body parameter. See BodyParameter for a list of available parameters.


  • void body_set_shape ( RID body, int shape_idx, RID shape )

Substitutes a given body shape by another. The old shape is selected by its index, the new one by its RID.


  • void body_set_shape_as_one_way_collision ( RID body, int shape_idx, bool enable, float margin )

Enables one way collision on body if enable is true.


  • void body_set_shape_disabled ( RID body, int shape_idx, bool disabled )

Disables shape in body if disable is true.


  • void body_set_shape_metadata ( RID body, int shape_idx, Variant metadata )

Sets metadata of a shape within a body. This metadata is different from Object.set_meta, and can be retrieved on shape queries.


Sets the transform matrix for a body shape.


  • void body_set_space ( RID body, RID space )

Assigns a space to the body (see space_create).


Sets a body state using one of the BodyState constants.

Note that the method doesn't take effect immediately. The state will change on the next physics frame.


Returns true if a collision would result from moving in the given direction from a given point in space. Margin increases the size of the shapes involved in the collision detection. Physics2DTestMotionResult can be passed to return additional information in.


  • RID capsule_shape_create ( )


  • RID circle_shape_create ( )


  • RID concave_polygon_shape_create ( )


  • RID convex_polygon_shape_create ( )


Creates a damped spring joint between two bodies. If not specified, the second body is assumed to be the joint itself.


Returns the value of a damped spring joint parameter.


Sets a damped spring joint parameter. See DampedStringParam for a list of available parameters.


  • void free_rid ( RID rid )

Destroys any of the objects created by Physics2DServer. If the RID passed is not one of the objects that can be created by Physics2DServer, an error will be sent to the console.


Returns information about the current state of the 2D physics engine. See ProcessInfo for a list of available states.


Creates a groove joint between two bodies. If not specified, the bodies are assumed to be the joint itself.


Returns the value of a joint parameter.


Returns a joint's type (see JointType).


Sets a joint parameter. See JointParam for a list of available parameters.


  • RID line_shape_create ( )


Creates a pin joint between two bodies. If not specified, the second body is assumed to be the joint itself.


  • RID ray_shape_create ( )


  • RID rectangle_shape_create ( )


  • RID segment_shape_create ( )


  • void set_active ( bool active )

Activates or deactivates the 2D physics engine.


Returns the shape data.


Returns a shape's type (see ShapeType).


Sets the shape data that defines its shape and size. The data to be passed depends on the kind of shape created shape_get_type.


  • RID space_create ( )

Creates a space. A space is a collection of parameters for the physics engine that can be assigned to an area or a body. It can be assigned to an area with area_set_space, or to a body with body_set_space.


Returns the state of a space, a Physics2DDirectSpaceState. This object can be used to make collision/intersection queries.


Returns the value of a space parameter.


  • bool space_is_active ( RID space ) const

Returns whether the space is active.


  • void space_set_active ( RID space, bool active )

Marks a space as active. It will not have an effect, unless it is assigned to an area or body.


Sets the value for a space parameter. See SpaceParameter for a list of available parameters.