RigidBody

Inherits: PhysicsBody < CollisionObject < Spatial < Node < Object

Inherited By: VehicleBody

Physics Body whose position is determined through physics simulation in 3D space.

Description

This is the node that implements full 3D physics. This means that you do not control a RigidBody directly. Instead, you can apply forces to it (gravity, impulses, etc.), and the physics simulation will calculate the resulting movement, collision, bouncing, rotating, etc.

A RigidBody has 4 behavior modes: Rigid, Static, Character, and Kinematic.

Note: Don't change a RigidBody's position every frame or very often. Sporadic changes work fine, but physics runs at a different granularity (fixed Hz) than usual rendering (process callback) and maybe even in a separate thread, so changing this from a process loop may result in strange behavior. If you need to directly affect the body's state, use _integrate_forces, which allows you to directly access the physics state.

If you need to override the default physics behavior, you can write a custom force integration function. See custom_integrator.

With Bullet physics (the default), the center of mass is the RigidBody3D center. With GodotPhysics, the center of mass is the average of the CollisionShape centers.

Methods

void

_integrate_forces ( PhysicsDirectBodyState state ) virtual

void

add_central_force ( Vector3 force )

void

add_force ( Vector3 force, Vector3 position )

void

add_torque ( Vector3 torque )

void

apply_central_impulse ( Vector3 impulse )

void

apply_impulse ( Vector3 position, Vector3 impulse )

void

apply_torque_impulse ( Vector3 impulse )

bool

get_axis_lock ( BodyAxis axis ) const

Array

get_colliding_bodies ( ) const

Basis

get_inverse_inertia_tensor ( )

void

set_axis_lock ( BodyAxis axis, bool lock )

void

set_axis_velocity ( Vector3 axis_velocity )

Signals

  • body_entered ( Node body )

Emitted when a body enters into contact with this one. Requires contact_monitor to be set to true and contacts_reported to be set high enough to detect all the collisions.


  • body_exited ( Node body )

Emitted when a body shape exits contact with this one. Requires contact_monitor to be set to true and contacts_reported to be set high enough to detect all the collisions.


  • body_shape_entered ( int body_id, Node body, int body_shape, int local_shape )

Emitted when a body enters into contact with this one. Requires contact_monitor to be set to true and contacts_reported to be set high enough to detect all the collisions.

This signal not only receives the body that collided with this one, but also its RID (body_id), the shape index from the colliding body (body_shape), and the shape index from this body (local_shape) the other body collided with.


  • body_shape_exited ( int body_id, Node body, int body_shape, int local_shape )

Emitted when a body shape exits contact with this one. Requires contact_monitor to be set to true and contacts_reported to be set high enough to detect all the collisions.

This signal not only receives the body that stopped colliding with this one, but also its RID (body_id), the shape index from the colliding body (body_shape), and the shape index from this body (local_shape) the other body stopped colliding with.


  • sleeping_state_changed ( )

Emitted when the physics engine changes the body's sleeping state.

Note: Changing the value sleeping will not trigger this signal. It is only emitted if the sleeping state is changed by the physics engine or emit_signal("sleeping_state_changed") is used.

Enumerations

enum Mode:

  • MODE_RIGID = 0 --- Rigid body mode. This is the "natural" state of a rigid body. It is affected by forces, and can move, rotate, and be affected by user code.

  • MODE_STATIC = 1 --- Static mode. The body behaves like a StaticBody, and can only move by user code.

  • MODE_CHARACTER = 2 --- Character body mode. This behaves like a rigid body, but can not rotate.

  • MODE_KINEMATIC = 3 --- Kinematic body mode. The body behaves like a KinematicBody, and can only move by user code.

Property Descriptions

Default

-1.0

Setter

set_angular_damp(value)

Getter

get_angular_damp()

Damps RigidBody's rotational forces.


Default

Vector3( 0, 0, 0 )

Setter

set_angular_velocity(value)

Getter

get_angular_velocity()

RigidBody's rotational velocity.


  • bool axis_lock_angular_x

Default

false

Setter

set_axis_lock(value)

Getter

get_axis_lock()

Lock the body's rotation in the X axis.


  • bool axis_lock_angular_y

Default

false

Setter

set_axis_lock(value)

Getter

get_axis_lock()

Lock the body's rotation in the Y axis.


  • bool axis_lock_angular_z

Default

false

Setter

set_axis_lock(value)

Getter

get_axis_lock()

Lock the body's rotation in the Z axis.


  • bool axis_lock_linear_x

Default

false

Setter

set_axis_lock(value)

Getter

get_axis_lock()

Lock the body's movement in the X axis.


  • bool axis_lock_linear_y

Default

false

Setter

set_axis_lock(value)

Getter

get_axis_lock()

Lock the body's movement in the Y axis.


  • bool axis_lock_linear_z

Default

false

Setter

set_axis_lock(value)

Getter

get_axis_lock()

Lock the body's movement in the Z axis.


Setter

set_bounce(value)

Getter

get_bounce()

The body's bounciness. Values range from 0 (no bounce) to 1 (full bounciness).

Deprecated, use PhysicsMaterial.bounce instead via physics_material_override.


Default

true

Setter

set_can_sleep(value)

Getter

is_able_to_sleep()

If true, the body can enter sleep mode when there is no movement. See sleeping.

Note: A RigidBody3D will never enter sleep mode automatically if its mode is MODE_CHARACTER. It can still be put to sleep manually by setting its sleeping property to true.


  • bool contact_monitor

Default

false

Setter

set_contact_monitor(value)

Getter

is_contact_monitor_enabled()

If true, the RigidBody will emit signals when it collides with another RigidBody. See also contacts_reported.


  • int contacts_reported

Default

0

Setter

set_max_contacts_reported(value)

Getter

get_max_contacts_reported()

The maximum number of contacts that will be recorded. Requires contact_monitor to be set to true.

Note: The number of contacts is different from the number of collisions. Collisions between parallel edges will result in two contacts (one at each end), and collisions between parallel faces will result in four contacts (one at each corner).


  • bool continuous_cd

Default

false

Setter

set_use_continuous_collision_detection(value)

Getter

is_using_continuous_collision_detection()

If true, continuous collision detection is used.

Continuous collision detection tries to predict where a moving body will collide, instead of moving it and correcting its movement if it collided. Continuous collision detection is more precise, and misses fewer impacts by small, fast-moving objects. Not using continuous collision detection is faster to compute, but can miss small, fast-moving objects.


  • bool custom_integrator

Default

false

Setter

set_use_custom_integrator(value)

Getter

is_using_custom_integrator()

If true, internal force integration will be disabled (like gravity or air friction) for this body. Other than collision response, the body will only move as determined by the _integrate_forces function, if defined.


Setter

set_friction(value)

Getter

get_friction()

The body's friction, from 0 (frictionless) to 1 (max friction).

Deprecated, use PhysicsMaterial.friction instead via physics_material_override.


Default

1.0

Setter

set_gravity_scale(value)

Getter

get_gravity_scale()

This is multiplied by the global 3D gravity setting found in Project > Project Settings > Physics > 3d to produce RigidBody's gravity. For example, a value of 1 will be normal gravity, 2 will apply double gravity, and 0.5 will apply half gravity to this object.


Default

-1.0

Setter

set_linear_damp(value)

Getter

get_linear_damp()

The body's linear damp. Cannot be less than -1.0. If this value is different from -1.0, any linear damp derived from the world or areas will be overridden.


Default

Vector3( 0, 0, 0 )

Setter

set_linear_velocity(value)

Getter

get_linear_velocity()

The body's linear velocity. Can be used sporadically, but don't set this every frame, because physics may run in another thread and runs at a different granularity. Use _integrate_forces as your process loop for precise control of the body state.


Default

1.0

Setter

set_mass(value)

Getter

get_mass()

The body's mass.


Default

0

Setter

set_mode(value)

Getter

get_mode()

The body mode. See Mode for possible values.


Setter

set_physics_material_override(value)

Getter

get_physics_material_override()

The physics material override for the body.

If a material is assigned to this property, it will be used instead of any other physics material, such as an inherited one.


Default

false

Setter

set_sleeping(value)

Getter

is_sleeping()

If true, the body will not move and will not calculate forces until woken up by another body through, for example, a collision, or by using the apply_impulse or add_force methods.


Default

9.8

Setter

set_weight(value)

Getter

get_weight()

The body's weight based on its mass and the global 3D gravity. Global values are set in Project > Project Settings > Physics > 3d.

Method Descriptions

Called during physics processing, allowing you to read and safely modify the simulation state for the object. By default, it works in addition to the usual physics behavior, but the custom_integrator property allows you to disable the default behavior and do fully custom force integration for a body.


  • void add_central_force ( Vector3 force )

Adds a constant directional force (i.e. acceleration) without affecting rotation.

This is equivalent to add_force(force, Vector3(0,0,0)).


Adds a constant directional force (i.e. acceleration).

The position uses the rotation of the global coordinate system, but is centered at the object's origin.


  • void add_torque ( Vector3 torque )

Adds a constant rotational force (i.e. a motor) without affecting position.


  • void apply_central_impulse ( Vector3 impulse )

Applies a directional impulse without affecting rotation.

This is equivalent to apply_impulse(Vector3(0,0,0), impulse).


Applies a positioned impulse to the body. An impulse is time independent! Applying an impulse every frame would result in a framerate-dependent force. For this reason it should only be used when simulating one-time impacts. The position uses the rotation of the global coordinate system, but is centered at the object's origin.


  • void apply_torque_impulse ( Vector3 impulse )

Applies a torque impulse which will be affected by the body mass and shape. This will rotate the body around the impulse vector passed.


Returns true if the specified linear or rotational axis is locked.


  • Array get_colliding_bodies ( ) const

Returns a list of the bodies colliding with this one. Requires contact_monitor to be set to true and contacts_reported to be set high enough to detect all the collisions.

Note: The result of this test is not immediate after moving objects. For performance, list of collisions is updated once per frame and before the physics step. Consider using signals instead.


  • Basis get_inverse_inertia_tensor ( )

Returns the inverse inertia tensor basis. This is used to calculate the angular acceleration resulting from a torque applied to the RigidBody.


Locks the specified linear or rotational axis.


  • void set_axis_velocity ( Vector3 axis_velocity )

Sets an axis velocity. The velocity in the given vector axis will be set as the given vector length. This is useful for jumping behavior.