High level multiplayer

High level vs low level API

The following explains the differences of high- and low-level networking in Godot as well as some fundamentals. If you want to jump in head-first and add networking to your first nodes, skip to Initializing the network below. But make sure to read the rest later on!

Godot always supported standard low-level networking via UDP, TCP and some higher level protocols such as SSL and HTTP. These protocols are flexible and can be used for almost anything. However using them to synchronize game state manually can be a large amount of work. Sometimes that work can’t be avoided or is worth it, for example when working with a custom server implementation on the backend. But in most cases it’s worthwhile to consider Godot’s high-level networking API, which sacrifices some of the fine-grained control of low-level networking for greater ease of use.

This is due to the inherent limitations of the low-level protocols:

  • TCP ensures packets will always arrive reliably and in order, but latency is generally higher due to error correction. It’s also quite a complex protocol because it understands what a “connection” is, and optimizes for goals that often don’t suit applications like multiplayer games. Packets are buffered to be sent in larger batches, trading less per-packet overhead for higher latency. This can be useful for things like HTTP, but generally not for games. Some of this can be configured and disabled (e.g. by disabling “Nagle’s algorithm” for the TCP connection).
  • UDP is a simpler protocol which only sends packets (and has no concept of a “connection”). No error correction makes it pretty quick (low latency), but packets may be lost along the way or received in the wrong order. Added to that, the MTU (maximum packet size) for UDP is generally low (only a few hundred bytes), so transmitting larger packets means splitting them, reorganizing them and retrying if a part fails.

In general, TCP can be thought of as reliable, ordered, and slow; UDP as unreliable, unordered and fast. Because of the large difference in performance it often makes sense to re-build the parts of TCP wanted for games (optional reliability and packet order) while avoiding the unwanted parts (congestion/traffic control features, Nagle’s algorithm, etc). Due to this most game engines come with such an implementation, and Godot is no exception.

In summary you can use the low-level networking API for maximum control and implement everything on top of bare network protocols or use the high-level API based on SceneTree that does most of the heavy lifting behind the scenes in a generally optimized way.


Most of Godot’s supported platforms offer all or most of the mentioned high- and low-level networking features. As networking is always largely hardware and operating system dependent, however, some features may change or not be available on some target platforms. Most notably, the HTML5 platform currently only offers WebSocket support and lacks some of the higher level features as well as raw access to low-level protocols like TCP and UDP.


More about TCP/IP, UDP, and networking: https://gafferongames.com/post/udp_vs_tcp/

Gaffer On Games has a lot of useful articles about networking in Games (here), including the comprehensive introduction to networking models in games.

If you want to use your low-level networking library of choice instead of Godot’s built-in networking, see here for an example: https://github.com/PerduGames/gdnet3


Adding networking to your game comes with some responsibility. It can make your application vulnerable if done wrong and may lead to cheats or exploits. It may even allow an attacker to compromise the machines your application runs on and use your servers to send spam, attack others or steal your users data if they play your game.

This is always the case when networking is involved and has nothing to do with Godot. You can of course experiment, but when you release a networked application, always take care of any possible security concerns.

Mid level abstraction

Before going into how we would like to synchronize a game across the network, it can be helpful to understand how the base network API for synchronization works.

Godot uses a mid-level object NetworkedMultiplayerPeer. This object is not meant to be created directly, but is designed so that several implementations can provide it:


This object extends from PacketPeer, so it inherits all the useful methods for serializing, sending and receiving data. On top of that, it adds methods to set a peer, transfer mode, etc. It also includes signals that will let you know when peers connect or disconnect.

This class interface can abstract most types of network layers, topologies and libraries. By default Godot provides an implementation based on ENet (NetworkedMultiplayerEnet), but this could be used to implement mobile APIs (for adhoc WiFi, Bluetooth) or custom device/console-specific networking APIs.

For most common cases, using this object directly is discouraged, as Godot provides even higher level networking facilities. Yet it is made available in case a game has specific needs for a lower level API.

Initializing the network

The object that controls networking in Godot is the same one that controls everything tree-related: SceneTree.

To initialize high level networking, the SceneTree must be provided a NetworkedMultiplayerPeer object.

To create that object it first has to be initialized as a server or client.

Initializing as a server, listening on the given port, with a given maximum number of peers:

var peer = NetworkedMultiplayerENet.new()
peer.create_server(SERVER_PORT, MAX_PLAYERS)

Initializing as a client, connecting to a given IP and port:

var peer = NetworkedMultiplayerENet.new()
peer.create_client(SERVER_IP, SERVER_PORT)

Note that it may make sense to store the local network peer instance on the SceneTree to be able to access it later, as there currently is no get_tree().get_network_peer(). This can be done via SceneTree’s metadata feature:

get_tree().set_meta("network_peer", peer)

Checking whether the tree is initialized as a server or client:


Terminating the networking feature:


(Although it may make sense to send a message first to let the other peers know you’re going away instead of letting the connection close or timeout, depending on your game.)

Managing connections

Some games accept connections at any time, others during the lobby phase. Godot can be requested to no longer accept connections at any point (see set_refuse_new_network_connections(bool) and related methods on SceneTree). To manage who connects, Godot provides the following signals in SceneTree:

Server and Clients:

  • network_peer_connected(int id)
  • network_peer_disconnected(int id)

The above signals are called on every peer connected to the server (including on the server) when a new peer connects or disconnects. Clients will connect with a unique ID greater than 1, while network peer ID 1 is always the server. Anything below 1 should be handled as invalid. You can retrieve the ID for the local system via SceneTree.get_network_unique_id(). These IDs will be useful mostly for lobby management and should generally be stored as they identify connected peers and thus players. You can also use IDs to send messages only to certain peers.


  • connected_to_server
  • connection_failed
  • server_disconnected

Again, all these functions are mainly useful for lobby management or for adding/removing players on the fly. For these tasks the server clearly has to work as a server and you have do tasks manually such as sending a newly connected player information about other already connected players (e.g. their names, stats, etc).

Lobbies can be implemented any way you want, but the most common way is to use a node with the same name across scenes in all peers. Generally, an autoloaded node/singleton is a great fit for this, to always have access to, e.g. “/root/lobby”.


To communicate between peers, the easiest way is to use RPCs (remote procedure calls). This is implemented as a set of functions in Node:

  • rpc(“function_name”, <optional_args>)
  • rpc_id(<peer_id>,”function_name”, <optional_args>)
  • rpc_unreliable(“function_name”, <optional_args>)
  • rpc_unreliable_id(<peer_id>, “function_name”, <optional_args>)

Synchronizing member variables is also possible:

  • rset(“variable”, value)
  • rset_id(<peer_id>, “variable”, value)
  • rset_unreliable(“variable”, value)
  • rset_unreliable_id(<peer_id>, “variable”, value)

Functions can be called in two fashions:

  • Reliable: the function call will arrive no matter what, but may take longer because it will be re-transmitted in case of failure.
  • Unreliable: if the function call does not arrive, it will not be re-transmitted, but if it arrives it will do it quickly.

In most cases, reliable is desired. Unreliable is mostly useful when synchronizing object positions (sync must happen constantly, and if a packet is lost, it’s not that bad because a new one will eventually arrive and it would likely be outdated because the object moved further in the meantime, even if it was resent reliably).

There is also the get_rpc_sender_id function in SceneTree which can be used to check which peer (or peer ID) sent a RPC call.

Back to lobby

Let’s get back to the lobby. Imagine that each player that connects to the server will tell everyone about it.

# Typical lobby implementation, imagine this being in /root/lobby

extends Node

# Connect all functions

func _ready():
    get_tree().connect("network_peer_connected", self, "_player_connected")
    get_tree().connect("network_peer_disconnected", self, "_player_disconnected")
    get_tree().connect("connected_to_server", self, "_connected_ok")
    get_tree().connect("connection_failed", self, "_connected_fail")
    get_tree().connect("server_disconnected", self, "_server_disconnected")

# Player info, associate ID to data
var player_info = {}
# Info we send to other players
var my_info = { name = "Johnson Magenta", favorite_color = Color8(255, 0, 255) }

func _player_connected(id):
    pass # Will go unused, not useful here

func _player_disconnected(id):
    player_info.erase(id) # Erase player from info

func _connected_ok():
    # Only called on clients, not server. Send my ID and info to all the other peers
    rpc("register_player", get_tree().get_network_unique_id(), my_info)

func _server_disconnected():
    pass # Server kicked us, show error and abort

func _connected_fail():
    pass # Could not even connect to server, abort

remote func register_player(id, info):
    # Store the info
    player_info[id] = info
    # If I'm the server, let the new guy know about existing players
    if get_tree().is_network_server():
        # Send my info to new player
        rpc_id(id, "register_player", 1, my_info)
        # Send the info of existing players
        for peer_id in player_info:
            rpc_id(id, "register_player", peer_id, player_info[peer_id])

    # Call function to update lobby UI here

You might have noticed already something different, which is the usage of the remote keyword on the register_player function:

remote func register_player(id, info):

This keyword has two main uses. The first is to let Godot know that this function can be called from RPC. If no keywords are added Godot will block any attempts to call functions for security. This makes security work a lot easier (so a client can’t call a function to delete a file on another client’s system).

The second use is to specify how the function will be called via RPC. There are four different keywords:

  • remote
  • sync
  • master
  • slave

The remote keyword means that the rpc() call will go via network and execute remotely.

The sync keyword means that the rpc() call will go via network and execute remotely, but will also execute locally (do a normal function call).

The others will be explained further down. Note that you could also use the get_rpc_sender_id function on SceneTree to check which peer actually made the RPC call to register_player.

With this, lobby management should be more or less explained. Once you have your game going you will most likely want to add some extra security to make sure clients don’t do anything funny (just validate the info they send from time to time, or before game start). For the sake of simplicity and because each game will share different information, this is not shown here.

Starting the game

Once enough players have gathered in the lobby, the server should probably start the game. This is nothing special in itself, but we’ll explain a few nice tricks that can be done at this point to make your life much easier.

Player scenes

In most games, each player will likely have its own scene. Remember that this is a multiplayer game, so in every peer you need to instance one scene for each player connected to it. For a 4 player game, each peer needs to instance 4 player nodes.

So, how to name such nodes? In Godot nodes need to have an unique name. It must also be relatively easy for a player to tell which nodes represent each player ID.

The solution is to simply name the root nodes of the instanced player scenes as their network ID. This way, they will be the same in every peer and RPC will work great! Here is an example:

remote func pre_configure_game():
    var selfPeerID = get_tree().get_network_unique_id()

    # Load world
    var world = load(which_level).instance()

    # Load my player
    var my_player = preload("res://player.tscn").instance()
    my_player.set_network_master(selfPeerID) # Will be explained later

    # Load other players
    for p in player_info:
        var player = preload("res://player.tscn").instance()

    # Tell server (remember, server is always ID=1) that this peer is done pre-configuring
    rpc_id(1, "done_preconfiguring", selfPeerID)


Depending on when you execute pre_configure_game() you may need to change any calls to add_child() to be deferred via call_deferred() as the SceneTree is locked while the scene is being created (e.g. when _ready() is being called).

Synchronizing game start

Setting up players might take different amount of time on every peer due to lag, different hardware, or other reasons. To make sure the game will actually start when everyone is ready, pausing the game until all players are ready can be useful:

remote func pre_configure_game():
    get_tree().set_pause(true) # Pre-pause
    # The rest is the same as in the code in the previous section (look above)

When the server gets the OK from all the peers, it can tell them to start, as for example:

var players_done = []
remote func done_preconfiguring(who):
    # Here is some checks you can do, as example
    assert(who in player_info) # Exists
    assert(not who in players_done) # Was not added yet


    if players_done.size() == player_info.size():

remote func post_configure_game():
    # Game starts now!

Synchronizing the game

In most games the goal of multiplayer networking is that the game runs synchronized on all the peers playing it. Besides supplying an RPC and remote member variable set implementation, Godot adds the concept network masters.

Network master

The network master of a node is the peer that has the ultimate authority over it.

When not explicitly set the network master is inherited from the parent node, which if not changed is always going to be the server (ID 1). Thus the server has authority over all nodes by default.

The network master can be set with the function Node.set_network_master(id, recursive) (recursive is true by default and means the network master is recursively set on all child nodes of the node as well).

Checking that a specific node instance on a peer is the network master for this node for all connected peers is done by calling Node.is_network_master(). This will return true when executed on the server and false on all client peers.

If you have paid attention to the previous example, it’s possible you noticed that the local peer is set to have network master authority for their own player instead of the server:

# Load my player
var my_player = preload("res://player.tscn").instance()
my_player.set_network_master(selfPeerID) # The player belongs to this peer, it has the authority

# Load other players
for p in player_info:
    var player = preload("res://player.tscn").instance()

Each time this piece of code is executed on each peer, the peer makes itself master on the node it controls, and all other nodes remain as slaves with the server being their network master.

To clarify, here is an example of how this looks in the bomber demo:


Master and slave keywords

The real advantage of this model is when used with the master/slave keywords in GDScript (or their equivalent in C# and Visual Script). Similarly to the remote keyword, functions can also be tagged with them:

Example bomb code:

for p in bodies_in_area:
    if p.has_method("exploded"):
        p.rpc("exploded", bomb_owner)

Example player code:

slave func stun():
    stunned = true

master func exploded(by_who):
    if stunned:
        return # Already stunned

    stun() # Stun myself, could have used sync keyword too.

In the above example, a bomb explodes somewhere (likely managed by whoever is master). The bomb knows the bodies in the area, so it checks them and checks that they contain an exploded function.

If they do, the bomb calls exploded on it. However, the exploded method in the player has a master keyword. This means that only the player who is master for that instance will actually get the function.

This instance, then, calls the stun function in the same instances of that same player (but in different peers), and only those which are set as slave, making the player look stunned in all the peers (as well as the current, master one).

Note that you could also send the stun() message only to a specific player by using rpc_id(<id>, “exploded”, bomb_owner). This may not make much sense for an area-of-effect case like the bomb but in other cases, like single target damage.

rpc_id(TARGET_PEER_ID, "stun") # Only stun the target peer