Lightweight object used for general-purpose animation via script, using Tweeners.
SceneTreeTween is a tween managed by the scene tree. As opposed to Tween, it does not require the instantiation of a node.
SceneTreeTweens are more light-weight than AnimationPlayer, so they are very much suited for simple animations or general tasks that don't require visual tweaking provided by the editor. They can be used in a fire-and-forget manner for some logic that normally would be done by code. You can e.g. make something shoot periodically by using a looped CallbackTweener with a delay.
SceneTreeTween can be created by using either SceneTree.create_tween or Node.create_tween.
SceneTreeTweens created manually (i.e. by using
Tween.new()) are invalid. They can't be used for tweening values, but you can do manual interpolation with interpolate_value.
var tween = get_tree().create_tween() tween.tween_property($Sprite, "modulate", Color.red, 1) tween.tween_property($Sprite, "scale", Vector2(), 1) tween.tween_callback($Sprite, "queue_free")
This sequence will make the
$Sprite node turn red, then shrink, before finally calling Node.queue_free to free the sprite. Tweeners are executed one after another by default. This behavior can be changed using parallel and set_parallel.
When a Tweener is created with one of the
tween_* methods, a chained method call can be used to tweak the properties of this Tweener. For example, if you want to set a different transition type in the above example, you can use set_trans:
var tween = get_tree().create_tween() tween.tween_property($Sprite, "modulate", Color.red, 1).set_trans(Tween.TRANS_SINE) tween.tween_property($Sprite, "scale", Vector2(), 1).set_trans(Tween.TRANS_BOUNCE) tween.tween_callback($Sprite, "queue_free")
Most of the
SceneTreeTween methods can be chained this way too. In the following example the
SceneTreeTween is bound to the running script's node and a default transition is set for its Tweeners:
var tween = get_tree().create_tween().bind_node(self).set_trans(Tween.TRANS_ELASTIC) tween.tween_property($Sprite, "modulate", Color.red, 1) tween.tween_property($Sprite, "scale", Vector2(), 1) tween.tween_callback($Sprite, "queue_free")
Another interesting use for
SceneTreeTweens is animating arbitrary sets of objects:
var tween = create_tween() for sprite in get_children(): tween.tween_property(sprite, "position", Vector2(0, 0), 1)
In the example above, all children of a node are moved one after another to position (0, 0).
You should avoid using more than one
SceneTreeTween per object's property. If two or more tweens animate one property at the same time, the last one created will take priority and assign the final value. If you want to interrupt and restart an animation, consider assigning the
SceneTreeTween to a variable:
var tween func animate(): if tween: tween.kill() # Abort the previous animation. tween = create_tween()
Some Tweeners use transitions and eases. The first accepts a TransitionType constant, and refers to the way the timing of the animation is handled (see easings.net for some examples). The second accepts an EaseType constant, and controls where the
trans_type is applied to the interpolation (in the beginning, the end, or both). If you don't know which transition and easing to pick, you can try different TransitionType constants with Tween.EASE_IN_OUT, and use the one that looks best.
SceneTreeTweens will automatically start by default. To prevent a
SceneTreeTween from autostarting, you can call stop immediately after it is created.
chain ( )
get_total_elapsed_time ( ) const
is_running ( ) const
is_valid ( ) const
kill ( )
parallel ( )
pause ( )
play ( )
stop ( )
finished ( )
Emitted when the
SceneTreeTween has finished all tweening. Never emitted when the
SceneTreeTween is set to infinite looping (see set_loops).
SceneTreeTween is removed (invalidated) in the next processing frame after this signal is emitted. Calling stop inside the signal callback will prevent the
SceneTreeTween from being removed.
loop_finished ( int loop_count )
step_finished ( int idx )
TWEEN_PAUSE_STOP = 1 --- If SceneTree is paused, the
SceneTreeTweenwill also pause.
TWEEN_PAUSE_PROCESS = 2 --- The
SceneTreeTweenwill process regardless of whether SceneTree is paused.
SceneTreeTween with the given
SceneTreeTweens are processed directly by the SceneTree, so they run independently of the animated nodes. When you bind a Node with the
SceneTreeTween will halt the animation when the object is not inside tree and the
SceneTreeTween will be automatically killed when the bound object is freed. Also TWEEN_PAUSE_BOUND will make the pausing behavior dependent on the bound node.
For a shorter way to create and bind a
SceneTreeTween, you can use Node.create_tween.
SceneTreeTween chain ( )
var tween = create_tween().set_parallel(true) tween.tween_property(...) tween.tween_property(...) # Will run parallelly with above. tween.chain().tween_property(...) # Will run after two above are finished.
SceneTreeTween by the given
delta value, in seconds. This is mostly useful for manual control when the
SceneTreeTween is paused. It can also be used to end the
SceneTreeTween animation immediately, by setting
delta longer than the whole duration of the
true if the
SceneTreeTween still has Tweeners that haven't finished.
float get_total_elapsed_time ( ) const
Returns the total time in seconds the
SceneTreeTween has been animating (i.e. the time since it started, not counting pauses etc.). The time is affected by set_speed_scale, and stop will reset it to
Note: As it results from accumulating frame deltas, the time returned after the
SceneTreeTween has finished animating will be slightly greater than the actual
This method can be used for manual interpolation of a value, when you don't want
SceneTreeTween to do animating for you. It's similar to @GDScript.lerp, but with support for custom transition and easing.
initial_value is the starting value of the interpolation.
delta_value is the change of the value in the interpolation, i.e. it's equal to
final_value - initial_value.
elapsed_time is the time in seconds that passed after the interpolation started and it's used to control the position of the interpolation. E.g. when it's equal to half of the
duration, the interpolated value will be halfway between initial and final values. This value can also be greater than
duration or lower than 0, which will extrapolate the value.
duration is the total time of the interpolation.
duration is equal to
0, the method will always return the final value, regardless of
bool is_running ( ) const
Returns whether the
SceneTreeTween is currently running, i.e. it wasn't paused and it's not finished.
bool is_valid ( ) const
Returns whether the
SceneTreeTween is valid. A valid
SceneTreeTween is a
SceneTreeTween contained by the scene tree (i.e. the array from SceneTree.get_processed_tweens will contain this
SceneTreeTween might become invalid when it has finished tweening, is killed, or when created with
SceneTreeTweens can't have Tweeners appended. You can however still use interpolate_value.
void kill ( )
Aborts all tweening operations and invalidates the
SceneTreeTween parallel ( )
Makes the next Tweener run parallelly to the previous one. Example:
var tween = create_tween() tween.tween_property(...) tween.parallel().tween_property(...) tween.parallel().tween_property(...)
All Tweeners in the example will run at the same time.
You can make the
SceneTreeTween parallel by default by using set_parallel.
void pause ( )
Pauses the tweening. The animation can be resumed by using play.
void play ( )
Resumes a paused or stopped
Sets the number of times the tweening sequence will be repeated, i.e.
set_loops(2) will run the animation twice.
Calling this method without arguments will make the
SceneTreeTween run infinitely, until either it is killed with kill, the
SceneTreeTween's bound node is freed, or all the animated objects have been freed (which makes further animation impossible).
Warning: Make sure to always add some duration/delay when using infinite loops. To prevent the game freezing, 0-duration looped animations (e.g. a single CallbackTweener with no delay) are stopped after a small number of loops, which may produce unexpected results. If a
SceneTreeTween's lifetime depends on some node, always use bind_node.
true, the Tweeners appended after this method will by default run simultaneously, as opposed to sequentially.
Default value is TWEEN_PAUSE_BOUND.
Default value is Tween.TWEEN_PROCESS_IDLE.
Scales the speed of tweening. This affects all Tweeners and their delays.
void stop ( )
Stops the tweening and resets the
SceneTreeTween to its initial state. This will not remove any appended Tweeners.
Creates and appends a CallbackTweener. This method can be used to call an arbitrary method in any object. Use
binds to bind additional arguments for the call.
Example: object that keeps shooting every 1 second.
var tween = get_tree().create_tween().set_loops() tween.tween_callback(self, "shoot").set_delay(1)
Example: turning a sprite red and then blue, with 2 second delay.
var tween = get_tree().create_tween() tween.tween_callback($Sprite, "set_modulate", [Color.red]).set_delay(2) tween.tween_callback($Sprite, "set_modulate", [Color.blue]).set_delay(2)
Creates and appends an IntervalTweener. This method can be used to create delays in the tween animation, as an alternative to using the delay in other Tweeners, or when there's no animation (in which case the
SceneTreeTween acts as a timer).
time is the length of the interval, in seconds.
Example: creating an interval in code execution.
# ... some code yield(create_tween().tween_interval(2), "finished") # ... more code
Example: creating an object that moves back and forth and jumps every few seconds.
var tween = create_tween().set_loops() tween.tween_property($Sprite, "position:x", 200.0, 1).as_relative() tween.tween_callback(self, "jump") tween.tween_interval(2) tween.tween_property($Sprite, "position:x", -200.0, 1).as_relative() tween.tween_callback(self, "jump") tween.tween_interval(2)
Creates and appends a MethodTweener. This method is similar to a combination of tween_callback and tween_property. It calls a method over time with a tweened value provided as an argument. The value is tweened between
to over the time specified by
duration, in seconds. Use
binds to bind additional arguments for the call. You can use MethodTweener.set_ease and MethodTweener.set_trans to tweak the easing and transition of the value or MethodTweener.set_delay to delay the tweening.
Example: making a 3D object look from one point to another point.
var tween = create_tween() tween.tween_method(self, "look_at", Vector3(-1, 0, -1), Vector3(1, 0, -1), 1, [Vector3.UP]) # The look_at() method takes up vector as second argument.
Example: setting a text of a Label, using an intermediate method and after a delay.
func _ready(): var tween = create_tween() tween.tween_method(self, "set_label_text", 0, 10, 1).set_delay(1) func set_label_text(value: int): $Label.text = "Counting " + str(value)
Creates and appends a PropertyTweener. This method tweens a
property of an
object between an initial value and
final_val in a span of time equal to
duration, in seconds. The initial value by default is the property's value at the time the tweening of the PropertyTweener starts. For example:
var tween = create_tween() tween.tween_property($Sprite, "position", Vector2(100, 200), 1) tween.tween_property($Sprite, "position", Vector2(200, 300), 1)
will move the sprite to position (100, 200) and then to (200, 300). If you use PropertyTweener.from or PropertyTweener.from_current, the starting position will be overwritten by the given value instead. See other methods in PropertyTweener to see how the tweening can be tweaked further.
Note: You can find the correct property name by hovering over the property in the Inspector. You can also provide the components of a property directly by using
position:x), where it would only apply to that particular component.
Example: moving object twice from the same position, with different transition types.
var tween = create_tween() tween.tween_property($Sprite, "position", Vector2.RIGHT * 300, 1).as_relative().set_trans(Tween.TRANS_SINE) tween.tween_property($Sprite, "position", Vector2.RIGHT * 300, 1).as_relative().from_current().set_trans(Tween.TRANS_EXPO)